Quick answer: Japan offshore wind drone work in 2026 needs a registered aircraft with Remote ID, MLIT permission and approval filed through DIPS 2.0 at least 10 business days ahead, a flight plan notification and flight logs. Blade inspection almost always triggers the within-30 m approval. Offshore launches may also need Japan Coast Guard coordination.
Japan offshore wind drone permits in 2026: what crews must file
A drone flight permit in Japan needs at least 10 business days through MLIT's DIPS 2.0 system. For offshore blade inspection, that form is the easy part. The delays come from everything stacked around it: the 30 m object rule, radio licensing, port and Coast Guard coordination, and flight logs an inspector can ask to see.
I've inspected about 3,000 wind turbines, onshore and offshore, in several APAC countries, and I hold drone licences in more than one of them. Of all the systems I've prepared for, Japan's has the most layers. Once you map it, it's also very predictable. This is the map for 2026, plus the parts of it I'd hand to software.
The Japanese term you'll see on every form is 無人航空機の飛行許可・承認, the permission and approval for flying an unmanned aircraft.
What permits does a drone need for offshore wind work in Japan in 2026?
You need aircraft registration, MLIT permission or approval for each specific flight category you trigger, a flight plan notification before every flight, and a radio licence if you use the 5.7 GHz band. Offshore work adds coordination with the port authority and the regional Japan Coast Guard office.
These are the layers, in the order I'd tackle them:
- Aircraft registration. Every drone of 100 g or more has needed registration and Remote ID since June 2022. An unregistered aircraft can't legally fly at all.
- Pilot qualification. A national licence (一等 or 二等) is optional for most inspection flights. Since December 2025 it carries much more weight in applications (more on that below).
- Flight permission and approval. Filed in DIPS 2.0 for each category the job triggers.
- Flight plan notification. Entered in DIPS before every specific flight so other airspace users can see it.
- Flight logs. Flight records, daily pre-flight checks and maintenance records, kept for every specific flight.
- Radio law. Applies if your control or video link uses 5.7 GHz.
- Maritime coordination. Port rules and Coast Guard notice, depending on where the vessel operates.

Which flight categories does blade inspection trigger?
Nearly every offshore blade job triggers the within-30 m approval, and many raise the over-150 m question. The table shows how typical inspection work maps onto Japan's specific flight categories.
| Flight condition | Why blade work triggers it | What to file |
|---|
| Within 30 m of people or objects | Close-up blade passes sit well inside 30 m of the structure | Approval in DIPS 2.0 |
| Above 150 m | Tip heights on modern offshore turbines pass 150 m | Covered by the 30 m carve-out near the structure; otherwise permission plus air traffic coordination |
| Beyond visual line of sight | The far side of the tower, or long transits from a vessel | Approval, with extra safety measures |
| Night flight | Rarely planned, but winter daylight is short in northern Japan | Approval if any flight can run past sunset |
| Near airports or in DID areas | Some onshore sites and port staging areas | Permission, plus airport coordination near airports |
The 150 m line has a useful exception. Since a 2021 rule change, airspace within 30 m of a structure is excluded from the over-150 m restriction, so upper blade sections can be inspected without a separate high-altitude permission. By definition, though, you're then inside 30 m of an object. That's why the 30 m approval appears on almost every inspection application.
How long does a DIPS 2.0 application take?
Plan on at least 10 business days from a complete application, and longer if the reviewer sends it back. In every country I've filed in, attachments slow things down more than the review does.
Two application types matter:
- Individual application for one job and one date window.
- Comprehensive application (包括申請) for repeated flights across a region, valid for up to 1 year. A crew planning a season of inspections should aim for this one.
The application asks for the aircraft's registration number, its specs and any modifications, the pilot's qualifications and flight hours, the operating manual you'll follow, and the safety measures for each category. MLIT publishes a standard manual (標準マニュアル). If your offshore procedures depart from it, for example launching and recovering from a moving vessel, you submit your own manual and should expect a longer review.
What changed for drone pilot licences since December 2025?
Since December 2025, private drone school certificates no longer simplify a DIPS application. Pilots without a national licence now document their skills and flight hours in full every time. For professional work, the national Class 2 licence (二等無人航空機操縦士) is the practical baseline.
A Class 2 pilot flying a type-certified airframe under 25 kg can skip permission for some Category II flights. Most heavy enterprise inspection drones don't carry Japanese type certification, so offshore crews still file. Class 1 is needed for Level 4 flights (beyond visual line of sight over people), which offshore blade work normally doesn't involve. Check MLIT's current guidance before you rely on any exemption, because the details get revised.
Relocating to Japan for renewable-energy inspection is on my own roadmap. The first thing I'd book is the Class 2 licence with the BVLOS and night limitations lifted. Courses run through registered training bodies (登録講習機関). Most course material is in Japanese, so confirm language options before you pay.
Do you need a radio licence for the 5.7 GHz band?
Yes, if your aircraft uses 5.7 GHz for control or video. That band needs at least the Third-Class Land Special Radio Operator certificate (第三級陸上特殊無線技士), a registered radio station, and channel coordination through the Japan UTM consortium. The 2.4 GHz band needs no licence.
Many crews stay on 2.4 GHz and skip the extra paperwork. If you want 5.7 GHz available offshore, take the exam months before the season. Radio paperwork has its own queue, separate from DIPS.
What do the Japan Coast Guard and port authorities expect offshore?
MLIT controls the airspace, and the sea surface has its own rules. Launching from a vessel in a port area or a busy sea lane can require notification or permission under the Port Regulations Act (港則法) or the Maritime Traffic Safety Act (海上交通安全法). Call the regional Coast Guard office early. They'll tell you what applies at that location.
A few points that save time:
- Ask the project's marine coordinator what the site's existing permits already cover. A drone launched from a crew transfer vessel can count as a new activity under an old permit.
- Japan's offshore wind zones are designated under the 2019 Act on Promoting the Utilization of Sea Areas (再エネ海域利用法). A 2025 amendment opened the way to sites in the EEZ. Sites farther out mean longer transits and more BVLOS questions on the application.
- Fishing cooperatives carry real weight in Japanese coastal areas. Schedule flights with local consultation in mind, especially in fishing season.
Can a foreign drone crew get a permit in Japan?
Yes. DIPS 2.0 accepts foreign applicants, and foreign-made aircraft register the same way as domestic ones. The harder questions sit outside aviation: a work visa that covers the job, someone who can answer the reviewer in Japanese, and insurance a Japanese client accepts.
My setup covers what clients check first: a registered company with full insurance, my own very well maintained equipment, and drone licences in several countries. None of it transfers into Japanese law automatically. It does make the first conversation shorter.
Which parts of the permit workflow can a small company automate?
Most of it, apart from the decisions. DIPS fields, flight plan notices, flight logs and the bilingual reports that follow are all structured text, and AI agents are good at structured text.
Here's what I know from my own systems. My pipeline writes and publishes trilingual technical inspection content (English, 中文, 日文) automatically, and wind-energy reporting that used to take days now takes hours. Permit work fits the same pattern. Keep one source of truth for aircraft, pilots and procedures, then let an agent draft each filing in the right format and language for a person to check and submit.
For a small inspection firm, or any technical SMB in Taiwan or Japan, these are the workflows I'd automate first. The ranges are my rough estimates for a small company. Real quotes depend on scope, existing systems and the number of languages.
| Workflow | Typical build time | Rough cost range |
|---|
| Permit and flight plan pack generator (DIPS fields, safety notes, EN and JA) | 1 to 2 weeks | ¥150,000 to ¥400,000 (about NT$32,000 to NT$85,000) |
| Flight log, daily check and maintenance record sync | About 1 week | ¥100,000 to ¥250,000 (about NT$21,000 to NT$53,000) |
| Bilingual or trilingual inspection report automation | 2 to 4 weeks | ¥400,000 to ¥1,000,000 (about NT$85,000 to NT$210,000) |
| Client email and LINE drafting for scheduling and weather calls | About 1 week | ¥100,000 to ¥200,000 (about NT$21,000 to NT$43,000) |
Running costs for a small company's paperwork should stay low, usually model API usage in the low thousands of yen a month, and less if light tasks run on local models.
The human keeps the risk judgment, the decision to fly and the signature. In my own operating system nothing gets sent without my click, and I build client systems the same way. The agent drafts, a person approves, and the DIPS submission stays a deliberate human action.
What should a crew prepare first for Japan in 2026?
Start with whatever has the longest lead time: the national licence course, the radio certificate and the comprehensive DIPS application. After that, build the paperwork system so each new job is mostly filling in fields.
My order:
- Register every aircraft and confirm Remote ID works.
- Book the Class 2 national licence course with the BVLOS and night limitations lifted.
- Decide on 5.7 GHz. If yes, sit the radio exam and register the station.
- Write an offshore operating manual that covers vessel launch and recovery.
- File a comprehensive application for the season.
- Set up flight log and bilingual report templates before the first flight.
If you run a small inspection or engineering company in Taiwan or Japan and paperwork is eating your week, I automate exactly that kind of work. I consult and teach by live video anywhere, or in person in Taiwan, in English or 中文.
快速解答: 2026 年在日本從事離岸風電無人機作業,需要具備 Remote ID 的已登錄機體、至少提前 10 個工作天透過 DIPS 2.0 向 MLIT 申請的飛行許可與承認、飛行計畫通報,以及飛行日誌。葉片檢測幾乎一定會觸發「距離 30 公尺以內」的承認。離岸起飛也可能需要與日本海上保安廳協調。
2026 年日本離岸風電無人機許可:作業團隊必須申報的項目
在日本申請無人機飛行許可,透過日本國土交通省(MLIT)的 DIPS 2.0 系統至少需要 10 個工作天。對離岸葉片檢測來說,這張表單反而是最簡單的部分。真正拖慢進度的是堆疊在它周圍的一切:30 公尺物件規定、無線電執照、港口與海上保安廳的協調,以及檢查人員隨時可能要求查看的飛行日誌。
我在亞太地區多個國家檢測過約 3,000 座風機,涵蓋陸域與離岸,並持有不只一個國家的無人機執照。在我準備過的所有制度中,日本的層級最多。不過一旦把它整理清楚,它也非常好預測。這篇就是 2026 年的地圖,再加上其中我會交給軟體處理的部分。
你會在每份表單上看到的日文用語是 無人航空機の飛行許可・承認,也就是無人航空器的飛行許可與承認。
2026 年在日本從事離岸風電作業,無人機需要哪些許可?
你需要機體登錄、針對每一種觸發的特定飛行類別取得 MLIT 的許可或承認、每次飛行前提交飛行計畫通報,若使用 5.7 GHz 頻段還需要無線電執照。離岸作業則另外需要與港務單位及當地管區海上保安本部協調。
以下是各個層級,依我會處理的順序排列:
- 機體登錄。 自 2022 年 6 月起,所有 100 公克以上的無人機都必須登錄並搭載 Remote ID。未登錄的機體完全不能合法飛行。
- 操作人員資格。 國家執照(一等或二等)對大多數檢測飛行而言並非必要。但自 2025 年 12 月起,它在申請中的分量大幅提高(後文詳述)。
- 飛行許可與承認。 針對作業觸發的每一種類別,在 DIPS 2.0 中提出申請。
- 飛行計畫通報。 每次特定飛行前都要在 DIPS 中登錄,讓其他空域使用者能看到。
- 飛行日誌。 每次特定飛行都要保存飛行紀錄、每日飛行前檢查與維護紀錄。
- 電波法。 若你的操控或影像傳輸使用 5.7 GHz,就適用此法。
- 海事協調。 依船舶作業地點,需遵守港口規定並通知海上保安廳。

葉片檢測會觸發哪些飛行類別?
幾乎每一件離岸葉片作業都會觸發「距離 30 公尺以內」的承認,很多案件也會碰到「150 公尺以上」的問題。下表整理了一般檢測作業如何對應到日本的特定飛行類別。
| 飛行條件 | 葉片作業為何會觸發 | 需要申請的項目 |
|---|
| 距離人或物件 30 公尺以內 | 近距離掃描葉片時,與結構物的距離遠小於 30 公尺 | 在 DIPS 2.0 申請承認 |
| 150 公尺以上 | 新型離岸風機的葉尖高度超過 150 公尺 | 結構物周邊 30 公尺的例外範圍可涵蓋;否則需申請許可並與航管協調 |
| 目視範圍外 | 塔架的另一側,或從船舶長距離移動 | 申請承認,並採取額外安全措施 |
| 夜間飛行 | 很少事先規劃,但日本北部冬季日照時間短 | 只要有任何飛行可能延續到日落後,就需申請承認 |
| 機場周邊或 DID 地區 | 部分陸域場址與港口集結區 | 申請許可,機場周邊還需與機場協調 |
150 公尺這條線有一個實用的例外。自 2021 年修法後,結構物周邊 30 公尺以內的空域不受 150 公尺以上的限制,因此檢測葉片上段時不需另外申請高空許可。但按照定義,這時你就位於物件 30 公尺以內。這正是為什麼幾乎每一份檢測申請都會出現 30 公尺承認。
DIPS 2.0 申請需要多久?
從送出完整申請起算,至少預留 10 個工作天;如果審查人員退件,時間會更長。在我申請過的每個國家,拖慢進度的都是附件,而不是審查本身。
有兩種申請類型最重要:
- 個別申請:針對單一案件與單一日期區間。
- 包括申請(包括申請):針對同一區域內的重複飛行,有效期最長 1 年。規劃整季檢測的團隊應以這種為目標。
申請內容包括機體登錄號碼、規格與任何改裝、操作人員的資格與飛行時數、你將遵循的飛行手冊,以及各類別的安全措施。MLIT 有公布一份標準手冊(標準マニュアル)。如果你的離岸作業程序與它不同,例如從移動中的船舶起降,就必須提交自己的手冊,審查時間也會拉長。
2025 年 12 月以來,無人機操作人員執照有什麼改變?
自 2025 年 12 月起,民間無人機學校的結業證書不再能簡化 DIPS 申請。沒有國家執照的操作人員,現在每次都必須完整提交技能與飛行時數的證明。對專業作業而言,國家二等執照(二等無人航空機操縱士)是實務上的基本門檻。
持有二等執照的操作人員,若操作重量 25 公斤以下且取得型式認證的機體,部分 Category II 飛行可免申請許可。但大多數重型企業級檢測無人機沒有取得日本型式認證,所以離岸團隊仍然需要申請。一等執照則是 Level 4 飛行(在有人區域上空進行目視範圍外飛行)所必需,而離岸葉片作業通常不涉及這種飛行。在依賴任何豁免之前,請先確認 MLIT 最新的指引,因為細節會不斷修訂。
移居日本從事再生能源檢測,也在我自己的規劃之中。我第一件要預約的事,就是解除目視範圍外與夜間限制的二等執照課程。課程由登錄講習機關(登録講習機関)開設。大部分教材都是日文,付款前請先確認語言選項。
5.7 GHz 頻段需要無線電執照嗎?
需要,只要你的機體使用 5.7 GHz 進行操控或影像傳輸。這個頻段至少需要第三級陸上特殊無線技士(第三級陸上特殊無線技士)資格、登錄無線電台,並透過 Japan UTM 聯盟進行頻道協調。2.4 GHz 頻段則不需要執照。
許多團隊選擇留在 2.4 GHz,省下額外的文書作業。如果你希望離岸時能使用 5.7 GHz,請在作業季前幾個月就參加考試。無線電相關文件有自己的排隊流程,與 DIPS 分開。
日本海上保安廳與港務單位對離岸作業有什麼要求?
MLIT 管的是空域,海面則有另一套規定。在港區或繁忙航道從船舶起飛,可能需要依《港則法》(港則法)或《海上交通安全法》(海上交通安全法)提出通報或申請許可。請及早聯絡當地管區海上保安本部,他們會告訴你該地點適用哪些規定。
幾個能節省時間的重點:
- 詢問專案的海事協調人員,場址現有的許可已經涵蓋哪些內容。從人員運輸船起飛的無人機,在舊許可下可能被視為一項新活動。
- 日本的離岸風電區域依 2019 年的《再生能源海域利用法》(再エネ海域利用法)劃設。2025 年的修正案為專屬經濟區(EEZ)內的場址開了路。場址越遠,航程越長,申請時也會遇到更多目視範圍外的問題。
- 漁業協同組合在日本沿海地區有實質影響力。安排飛行時要把地方協商納入考量,漁季期間尤其如此。
外國無人機團隊能在日本取得許可嗎?
可以。DIPS 2.0 接受外國申請人,外國製造的機體登錄方式也與國產機相同。比較難的問題在航空之外:能涵蓋該工作的工作簽證、能用日文回覆審查人員的人,以及日本客戶接受的保險。
我的配置涵蓋了客戶最先確認的項目:完整投保的登記公司、自有且維護極佳的設備,以及多國的無人機執照。這些都不會自動轉換為日本法律上的資格,但確實能讓第一次洽談更快進入重點。
小型公司可以自動化許可流程中的哪些部分?
除了決策之外,大部分都可以。DIPS 欄位、飛行計畫通報、飛行日誌,以及後續的雙語報告,全都是結構化文字,而 AI 代理很擅長處理結構化文字。
以下是我從自己的系統中得到的經驗。我的流程會自動撰寫並發布三語(英文、中文、日文)技術檢測內容,過去需要好幾天的風電報告,現在只要幾個小時。許可作業也符合同樣的模式:為機體、操作人員與作業程序維護單一資料來源,再讓代理以正確的格式與語言起草每一份申請,交由人員檢查並送出。
對小型檢測公司,或任何在台灣或日本的技術型中小企業來說,以下是我會優先自動化的流程。金額範圍是我針對小型公司的粗略估計,實際報價取決於範圍、現有系統與語言數量。
| 流程 | 一般建置時間 | 粗估費用範圍 |
|---|
| 許可與飛行計畫文件產生器(DIPS 欄位、安全說明、英文與日文) | 1 至 2 週 | ¥150,000 至 ¥400,000(約 NT$32,000 至 NT$85,000) |
| 飛行日誌、每日檢查與維護紀錄同步 | 約 1 週 | ¥100,000 至 ¥250,000(約 NT$21,000 至 NT$53,000) |
| 雙語或三語檢測報告自動化 | 2 至 4 週 | ¥400,000 至 ¥1,000,000(約 NT$85,000 至 NT$210,000) |
| 排程與天候判斷的客戶 Email 及 LINE 訊息起草 | 約 1 週 | ¥100,000 至 ¥200,000(約 NT$21,000 至 NT$43,000) |
小型公司處理文書作業的營運成本應該很低,通常是每月幾千日圓的模型 API 使用費;如果輕量任務改用本地模型執行,還會更低。
風險判斷、是否起飛的決定與簽名,都由人來負責。在我自己的作業系統中,沒有我按下確認,任何東西都不會送出,我為客戶打造的系統也是如此。代理負責起草,人負責核准,而 DIPS 的送出始終是一個刻意由人執行的動作。
2026 年要進入日本,團隊應該先準備什麼?
從準備期最長的項目開始:國家執照課程、無線電資格,以及 DIPS 包括申請。接著建立文書作業系統,讓每件新案件大致上只需要填寫欄位。
我的順序:
- 登錄每一架機體,並確認 Remote ID 正常運作。
- 預約解除目視範圍外與夜間限制的二等國家執照課程。
- 決定是否使用 5.7 GHz。如果要,就參加無線電考試並登錄電台。
- 撰寫涵蓋船舶起降的離岸飛行手冊。
- 為整個作業季提出包括申請。
- 在第一次飛行前,建立好飛行日誌與雙語報告範本。
如果你在台灣或日本經營小型檢測或工程公司,而文書作業正在吃掉你整週的時間,我做的正是這類工作的自動化。我可以透過視訊在任何地方提供顧問與教學,也可以在台灣面對面進行,使用英文或中文。
要点: 2026年に日本で洋上風力のドローン業務を行うには、リモートIDを搭載した登録済みの機体が必要です。さらに、少なくとも10開庁日前にDIPS 2.0で申請した国土交通省の許可・承認、飛行計画の通報、飛行日誌も求められます。ブレード点検では、ほぼ必ず人や物件から30m未満の飛行の承認が必要です。洋上からの離陸では、海上保安庁との調整が必要になる場合もあります。
2026年 日本の洋上風力ドローン許可:クルーが提出すべき書類
日本でドローンの飛行許可を取るには、国土交通省のDIPS 2.0で少なくとも10開庁日かかります。洋上のブレード点検に限って言えば、この申請書はむしろ簡単な部分です。遅れの原因はその周りに積み重なる要件です。30mルール、無線の免許、港湾や海上保安庁との調整、そして検査官から提示を求められることがある飛行日誌などです。
私はこれまでアジア太平洋の複数の国で、陸上と洋上を合わせて約3,000基の風力タービンを点検してきました。ドローンの資格も複数の国で取得しています。これまで準備してきたどの国の制度と比べても、日本の制度は最も層が多いです。ただし全体像をつかめば、とても予測しやすい制度でもあります。この記事は2026年版のその地図であり、ソフトウェアに任せられる部分もあわせて紹介します。
どの申請書にも出てくる日本語の用語は「無人航空機の飛行許可・承認」です。
2026年に日本で洋上風力の業務を行うドローンには、どんな許可が必要ですか?
必要なのは機体登録、該当する特定飛行の区分ごとの国土交通省の許可または承認、毎回の飛行前の飛行計画の通報です。5.7GHz帯を使う場合は無線の免許も要ります。洋上の業務では、これに加えて港湾管理者と管区海上保安本部との調整が必要です。
以下が各層で、私が取り組む順番に並べています。
- 機体登録。 2022年6月以降、100g以上のドローンはすべて登録とリモートIDが必要です。未登録の機体は、そもそも合法的に飛ばすことができません。
- 操縦者の資格。 国家資格(一等または二等)は、ほとんどの点検飛行では必須ではありません。ただし2025年12月以降、申請における重みが大きく増しています(詳しくは後述します)。
- 飛行の許可・承認。 業務が該当する区分ごとにDIPS 2.0で申請します。
- 飛行計画の通報。 特定飛行の前に毎回DIPSに入力し、他の空域利用者が確認できるようにします。
- 飛行日誌。 特定飛行ごとに、飛行記録、日常点検記録、点検整備記録を残します。
- 電波法。 操縦や映像伝送に5.7GHz帯を使う場合に適用されます。
- 海上での調整。 船舶が運航する場所に応じて、港湾のルールや海上保安庁への届出が関わります。

ブレード点検はどの飛行区分に該当しますか?
洋上のブレード点検は、ほぼすべてが30m未満の飛行の承認に該当します。150m以上の飛行が問題になるケースも多くあります。下の表は、典型的な点検業務が日本の特定飛行の区分にどう対応するかを示しています。
| 飛行条件 | ブレード点検が該当する理由 | 申請内容 |
|---|
| 人または物件から30m未満 | ブレードに接近して飛ぶため、構造物から30mよりかなり内側を飛行する | DIPS 2.0で承認を申請 |
| 150m以上 | 最新の洋上タービンは翼端の高さが150mを超える | 構造物付近は30mの除外規定でカバーされる。それ以外は許可と航空交通の調整が必要 |
| 目視外飛行 | タワーの裏側や、船舶からの長距離移動 | 追加の安全対策を添えて承認を申請 |
| 夜間飛行 | 計画されることは少ないが、北日本の冬は日照時間が短い | 日没後にかかる可能性がある飛行があれば承認を申請 |
| 空港周辺またはDID地区 | 一部の陸上サイトや港の準備エリア | 許可を申請。空港周辺では空港との調整も必要 |
150mの基準には便利な例外があります。2021年の規則改正で、構造物から30m以内の空域は150m以上の飛行制限から除外されました。そのため、ブレードの上部も別途高高度の許可を取らずに点検できます。ただしその場合、定義上は物件から30m未満を飛行していることになります。30mの承認がほぼすべての点検申請に登場するのはこのためです。
DIPS 2.0の申請にはどのくらい時間がかかりますか?
書類がそろった申請から少なくとも10開庁日を見込んでください。審査担当者から差し戻されれば、さらに長くなります。私が申請してきたどの国でも、審査そのものより添付書類のほうが時間を取られました。
重要な申請の種類は2つです。
- 個別申請: 1件の業務と1つの日程枠を対象とします。
- 包括申請: 地域内で繰り返し行う飛行を対象とし、最長1年間有効です。シーズンを通して点検を計画するクルーは、こちらを目指すべきです。
申請では、機体の登録記号、仕様と改造の有無、操縦者の資格と飛行時間、使用する飛行マニュアル、各区分の安全対策を記載します。国土交通省は標準マニュアルを公開しています。移動中の船舶からの離着陸など、洋上での手順が標準マニュアルから外れる場合は独自のマニュアルを提出することになり、審査も長くなると考えておいてください。
2025年12月以降、ドローン操縦者の資格はどう変わりましたか?
2025年12月以降、民間のドローンスクールの修了証では、DIPS申請の簡略化ができなくなりました。国家資格を持たない操縦者は、毎回、技能と飛行時間をすべて書類で示す必要があります。業務として飛ばすなら、国家資格の二等無人航空機操縦士が実質的な最低ラインです。
二等の資格を持つ操縦者が、型式認証を受けた25kg未満の機体を飛ばす場合、一部のカテゴリーIIの飛行では許可が不要になります。ただし大型の産業用点検ドローンの多くは日本の型式認証を受けていないため、洋上のクルーは結局申請が必要です。一等の資格はレベル4飛行(有人地帯での目視外飛行)に必要ですが、洋上のブレード点検では通常該当しません。細かな規定は改正されるため、免除規定を前提にする前に国土交通省の最新のガイダンスを確認してください。
再生可能エネルギーの点検のために日本へ拠点を移すことは、私自身のロードマップにも入っています。最初に予約するのは、目視外と夜間の限定を解除した二等の資格の講習です。講習は登録講習機関で受けられます。教材のほとんどは日本語なので、支払う前に対応言語を確認してください。
5.7GHz帯には無線の免許が必要ですか?
はい。機体が操縦や映像に5.7GHz帯を使う場合は必要です。この帯域には、少なくとも第三級陸上特殊無線技士の資格、無線局の開設、そしてJUTM(日本無人機運行管理コンソーシアム)を通じたチャンネル調整が求められます。2.4GHz帯は免許不要です。
多くのクルーは2.4GHz帯にとどめ、追加の書類作業を避けています。洋上で5.7GHz帯を使えるようにしたい場合は、シーズンの何か月も前に試験を受けておきましょう。無線関係の手続きはDIPSとは別の順番待ちになります。
洋上では、海上保安庁や港湾管理者は何を求めますか?
空域は国土交通省の管轄ですが、海面には海面のルールがあります。港内や船舶の往来が多い航路で船舶から離陸する場合、港則法や海上交通安全法に基づく届出や許可が必要になることがあります。早めに管区海上保安本部に電話してください。その場所で何が適用されるかを教えてもらえます。
時間を節約できるポイントをいくつか挙げます。
- サイトの既存の許可で何がカバーされているか、プロジェクトの海上コーディネーターに確認してください。作業員輸送船(CTV)からドローンを飛ばすことが、既存の許可の範囲外の新しい活動とみなされる場合があります。
- 日本の洋上風力の促進区域は、2019年の再エネ海域利用法に基づいて指定されています。2025年の改正でEEZ(排他的経済水域)内のサイトへの道が開かれました。沖合のサイトほど移動距離が長くなり、申請で目視外飛行に関する確認事項も増えます。
- 日本の沿岸地域では漁業協同組合が大きな影響力を持っています。特に漁期には、地元との協議を考慮して飛行の日程を組んでください。
外国のドローンクルーでも日本で許可を取れますか?
はい。DIPS 2.0は外国からの申請者も受け付けており、外国製の機体も国内の機体と同じ方法で登録できます。難しいのは航空以外の部分です。その業務をカバーする就労ビザ、審査担当者に日本語で対応できる人、そして日本の顧客が認める保険です。
私の体制は、顧客が最初に確認する点をカバーしています。十分な保険に加入した登記済みの会社、入念に整備された自前の機材、複数の国のドローン資格です。どれも日本の法律にそのまま引き継がれるわけではありません。それでも、最初の話し合いは短く済みます。
許可のワークフローのうち、小さな会社が自動化できるのはどの部分ですか?
判断以外のほとんどです。DIPSの入力項目、飛行計画の通報、飛行日誌、その後に続くバイリンガルの報告書は、どれも構造化されたテキストです。そしてAIエージェントは構造化されたテキストを得意としています。
私自身のシステムでわかっていることをお伝えします。私のパイプラインは、3か国語(英語、中文、日本語)の技術的な点検コンテンツを自動で作成して公開しています。以前は何日もかかっていた風力エネルギーの報告書作成も、今では数時間で終わります。許可関係の作業も同じパターンに当てはまります。機体、操縦者、手順の情報源を1つにまとめ、エージェントが各申請書を適切な形式と言語で下書きし、人が確認して提出します。
小さな点検会社や、台湾または日本の技術系中小企業であれば、私は次のワークフローから自動化します。金額の幅は、小さな会社を想定した私のおおよその見積もりです。実際の見積もりは、範囲、既存のシステム、言語の数によって変わります。
| ワークフロー | 一般的な構築期間 | おおよその費用 |
|---|
| 許可申請と飛行計画のパック生成(DIPSの入力項目、安全上の注意事項、英語と日本語) | 1〜2週間 | 15万円〜40万円(約NT$32,000〜NT$85,000) |
| 飛行日誌、日常点検、点検整備記録の同期 | 約1週間 | 10万円〜25万円(約NT$21,000〜NT$53,000) |
| 2か国語または3か国語の点検報告書の自動化 | 2〜4週間 | 40万円〜100万円(約NT$85,000〜NT$210,000) |
| 日程調整や天候判断のための顧客向けメールとLINEの下書き | 約1週間 | 10万円〜20万円(約NT$21,000〜NT$43,000) |
小さな会社の書類作業なら、運用コストは低く抑えられます。通常はモデルのAPI利用料が月に数千円程度で、軽い作業をローカルモデルで処理すればさらに安くなります。
リスクの判断、飛行の決定、署名は人が担います。私自身のオペレーティングシステムでは、私がクリックしない限り何も送信されません。顧客向けのシステムも同じように構築しています。エージェントが下書きし、人が承認し、DIPSへの提出はあくまで人が意図して行う操作のままにします。
2026年の日本に向けて、クルーはまず何を準備すべきですか?
リードタイムが最も長いものから始めてください。国家資格の講習、無線の資格、DIPSの包括申請です。その後に書類作業の仕組みを整え、新しい業務のたびにほぼ項目を埋めるだけで済むようにします。
私の順番は次のとおりです。
- すべての機体を登録し、リモートIDが機能することを確認する。
- 目視外と夜間の限定を解除した二等の国家資格の講習を予約する。
- 5.7GHz帯を使うかどうかを決める。使う場合は無線の試験を受け、無線局を開設する。
- 船舶からの離着陸を含む洋上用の飛行マニュアルを作成する。
- シーズンに向けて包括申請を行う。
- 最初の飛行の前に、飛行日誌とバイリンガルの報告書のテンプレートを用意する。
台湾や日本で小さな点検会社やエンジニアリング会社を経営していて、書類作業に1週間を取られているなら、まさにそうした作業を私が自動化します。コンサルティングと講習は、ライブのビデオ通話なら場所を問わず、対面なら台湾で、英語または中文で対応しています。
Frequently asked questions常見問題よくある質問
How far in advance should I apply for a drone permit in Japan?How far in advance should I apply for a drone permit in Japan?How far in advance should I apply for a drone permit in Japan?
Submit the DIPS 2.0 application at least 10 business days before the first flight, and leave extra time in case the reviewer returns it. For a season of offshore work, file a comprehensive application valid for up to 1 year so each job doesn't need a new filing.Submit the DIPS 2.0 application at least 10 business days before the first flight, and leave extra time in case the reviewer returns it. For a season of offshore work, file a comprehensive application valid for up to 1 year so each job doesn't need a new filing.Submit the DIPS 2.0 application at least 10 business days before the first flight, and leave extra time in case the reviewer returns it. For a season of offshore work, file a comprehensive application valid for up to 1 year so each job doesn't need a new filing.
Do I need a Japanese national drone licence for wind turbine inspection?Do I need a Japanese national drone licence for wind turbine inspection?Do I need a Japanese national drone licence for wind turbine inspection?
It isn't mandatory for most inspection flights. Since December 2025, though, private school certificates no longer simplify applications, so pilots without a national licence document their skills in full every time. A Class 2 licence is the practical baseline for professional work.It isn't mandatory for most inspection flights. Since December 2025, though, private school certificates no longer simplify applications, so pilots without a national licence document their skills in full every time. A Class 2 licence is the practical baseline for professional work.It isn't mandatory for most inspection flights. Since December 2025, though, private school certificates no longer simplify applications, so pilots without a national licence document their skills in full every time. A Class 2 licence is the practical baseline for professional work.
Does flying within 30 m of a wind turbine need approval in Japan?Does flying within 30 m of a wind turbine need approval in Japan?Does flying within 30 m of a wind turbine need approval in Japan?
In practice, yes. Close blade inspection puts the drone well inside 30 m of the structure, so almost every inspection application includes the within-30 m approval. The same 30 m zone also exempts the flight from the over-150 m restriction near tall structures.In practice, yes. Close blade inspection puts the drone well inside 30 m of the structure, so almost every inspection application includes the within-30 m approval. The same 30 m zone also exempts the flight from the over-150 m restriction near tall structures.In practice, yes. Close blade inspection puts the drone well inside 30 m of the structure, so almost every inspection application includes the within-30 m approval. The same 30 m zone also exempts the flight from the over-150 m restriction near tall structures.
Can a foreign company apply for drone permits in Japan?Can a foreign company apply for drone permits in Japan?Can a foreign company apply for drone permits in Japan?
Yes. DIPS 2.0 accepts foreign applicants, and foreign aircraft register the same way as domestic ones. Expect the work visa, insurance accepted by the client, and Japanese-language communication with reviewers to take more effort than the aviation forms.Yes. DIPS 2.0 accepts foreign applicants, and foreign aircraft register the same way as domestic ones. Expect the work visa, insurance accepted by the client, and Japanese-language communication with reviewers to take more effort than the aviation forms.Yes. DIPS 2.0 accepts foreign applicants, and foreign aircraft register the same way as domestic ones. Expect the work visa, insurance accepted by the client, and Japanese-language communication with reviewers to take more effort than the aviation forms.
How much does it cost to automate drone permit and report paperwork?How much does it cost to automate drone permit and report paperwork?How much does it cost to automate drone permit and report paperwork?
My rough range for a small company is about ¥100,000 to ¥400,000 (NT$21,000 to NT$85,000) for permit packs or flight log sync, and up to about ¥1,000,000 (NT$210,000) for full multilingual report automation. Exact quotes depend on scope and existing systems.My rough range for a small company is about ¥100,000 to ¥400,000 (NT$21,000 to NT$85,000) for permit packs or flight log sync, and up to about ¥1,000,000 (NT$210,000) for full multilingual report automation. Exact quotes depend on scope and existing systems.My rough range for a small company is about ¥100,000 to ¥400,000 (NT$21,000 to NT$85,000) for permit packs or flight log sync, and up to about ¥1,000,000 (NT$210,000) for full multilingual report automation. Exact quotes depend on scope and existing systems.